-
Vendor: XS ScubaInstalls between low pressure regulator hose and second stage Increase comfort and reduce jaw fatigue Used to improve regulator hose routing Often used to set up underarm routing of primary regulator hose Chromed brass construction with Viton O-rings Low pressure use only – below...
- $52.99
-
- $52.99
- Unit price
- per
-
Vendor: XS ScubaReroute, or increase, the number of low pressure hoses coming off your first stage Chromed brass construction with Viton o-rings Low pressure only – below 200 psi (1) 3/8”-24 male inlet to (2) 3/8”-24 female outlets
- $41.08
-
- $41.08
- Unit price
- per
-
Vendor: XS ScubaConvert any standard regulator hose to a “ScubaPro Style” QD hose Installs to the second stage end of a regulator hose Chromed brass construction with Viton o-rings Low pressure use only - below 200 psi Compatible with: ScubaPro Air 2, Tusa Duo Air, Atomic...
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS ScubaProtect your hoses from premature failure. Secure attachment of a clip without causing potential damage to the hose For use with all low pressure scuba hoses with an approximate 0.5 in (13 mm) diameter Includes 2 break-away straps
- $24.94
-
- $24.94
- Unit price
- per
-
Vendor: XS ScubaNot all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on the fitting and a date code so you will know the age of the hose.
- $66.99
-
- $66.99
- Unit price
- per
-
Vendor: XS ScubaNot all rubber hoses are created equally. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on the fitting and a date code so you will know the age of the hose.
- $65.99
-
- $65.99
- Unit price
- per
-
Vendor: XS ScubaDeveloped specifically for technical and professional divers, the XT-Tech hoses have a smooth outer layer and reduced flexibility compared to the Xtreme hoses. The smooth outer surface prevents abrasion around the neck Less flexibility and negative buoyancy allow the longer hoses to stay in...
- From $73.36
-
- From $73.36
- Unit price
- per
-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- $67.49
-
- $67.49
- Unit price
- per
-
Vendor: XS ScubaLightweight and flexible low pressure hoses Multi-layer construction Excellent resistance to abrasion Kink-resistant design Approved for use for use with up to 40% oxygen Individually tested at the factory EN250 approved Individually marked with the Miflex logo and date code Manufactured in Italy Inner...
- $67.49
-
- $67.49
- Unit price
- per
-
Vendor: XS ScubaEasy to adjust from 150 to 250 psi Factory preset at 200 psi (+/- 10 psi) All stainless steel construction with Viton O-rings Machined Delrin cap protects the adjustment point Compact relief valve releases pressure in the event of an over pressurization of the...
- $61.40
-
- $61.40
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaAre you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level. The 60º swivel ball joint on the second stage...
- $132.60
-
- $132.60
- Unit price
- per
-
Vendor: XS ScubaProtect the end of your second stage and hose when the second stage is disconnected from the hose Includes both male and female plugs Machined Delrin construction Not to be used under pressure
- $16.87
-
- $16.87
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF male Chromed brass...
- $13.94
-
- $13.94
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 3/8”-24 UNF female Stainless steel...
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS ScubaConverting your regulator/hoses to 1/4” NPT has many practical application in diving as well as your garage or shop Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools Viton o-rings where applicable 1/4” NPT male to 9/16”-18 male Stainless steel construction...
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS Scuba3/8”-24 female x 3/8”-24 male Extend the placement of LP port away from first stage 16 mm height Brass construction with black chrome finish Viton o-rings where applicable Low pressure use only - below 200 psi
- $16.87
-
- $16.87
- Unit price
- per
-
Vendor: XS ScubaConvert any standard regulator hose to a “Drysuit Style” QD hose Installs to the second stage end of a regulator hose Chromed brass construction with Viton o-rings Low pressure use only - below 200 psi Compatible with: Swedish CEJN couplers as found on many...
- $33.75
-
- $33.75
- Unit price
- per
-
Vendor: XS ScubaRetains one Miflex HP braided hose (8mm) and one standard diameter (11-13 mm) low or high pressure hose Two-way swivel Delrin and stainless steel construction
- $11.00
-
- $11.00
- Unit price
- per